Skip to main content

Case Designs & 3D Models

Beepy STEP model

beepy-v1.step

Case Designs

Below are some case designs for the Beepy. If you have any designs you'd like to share with the community, please submit a Pull Request to this repo (include a brief description and some renders/pics): https://github.com/sqfmi/beepy-hardware.

Clear Sandwich

Buy Now!

____

Instructions

  1. Remove the top screws and the SD card from the Raspberry Pi
  2. Align the back plate and tighten the 9mm screws on top. Make sure the battery is sitting securely. You can use the packaging foam for a snug fit.
  3. Align the front plate and tighten the 5mm screws on top and the 12mm screws in the bottom

V1

V1 design of a Beepy case, suitable for 3D printing, requires some tweaking for a proper fit. Screws are M2.5x5mm.

STLs and STEP model

Slim Flat

Slim, flat, minimal case for the Beepy

STLs and STEP model

CNC Case

Coming Soon